Blackstar Dept. 10 AMPED 1 100 Watt Guitar Amplifier Pedal
100W Amplifier pedal with Cab Rig DSP Technology, 6 output response emulators, and footswitchable reverb with freeze effect Item ID: AMPED1
Fast & Free Shipping Fast Shipping
Hassle-Free Returns
Independent Since 1960
Musicians Helping Musicians
Couldn't load pickup availability
In our stores
Pairs well with
Blackstar Dept. 10 AMPED 1 100 Watt Guitar Amplifier Pedal
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Highlights
- 100 Watt Amplifier Pedal with power reduction to 1W and 20W
- Simulate KT88, 6L6, EL34, 6V6, and EL84 power tube configs
- Linear response is clean and flat, pairing with your modeler perfectly
- Cab Rig and Architect technology allows you to connect to a computer via USB for tweaks
- 2 x 9V DC outputs to power your pedals
- Powers 8 or 16 Ohm cabs
- Onboard reverb with freeze effect
- Weighs only 2.4 pounds!
Description
The Blackstar Amplification AMPED 1 is a 100-watt amp pedal built on countless hours of research and development to accomplish two main goals. Goal #1 was to build a true 100W pedal based guitar amplifier that accurately recreated the sound AND feel of multiple tube amplifier configurations. Goal #2 was to ensure that AMPED 1 would be top of industry for pairing with amp modelers, profilers, preamp pedals, DAW’s etc. Blackstar AMPED 1 comes with Cab Rig software which allows you to connect the pedal to your computer to adjust a myriad of elements in the presets including the speaker, cabinet, microphone, and room emulation. Combined with Blackstar’s Architect software you can control settings for the built-in reverb, the effects loop, and more. The end result is an extremely adjustable floorboard amp simulator that uses the latest technology to ensure a 360° tube amp experience in the convenience of a lightweight pedal.
The 100-watt amplifier can be dialed back to 20W and even 1W for versatile control over your headroom. Response control allows seamless recreation of various power tube configurations including KT88, EL34, EL84, 6L6, and 6V6. The linear selection allows you to sense a completely transparent, flat signal to a paired amp modeler. Scroll through presets via the footswitch on the right, while the footswitch on the left controls an onboard reverb with built in freeze functionality.
Blackstar AMPED 1 is based on legendary tone of legacy amplifiers but with a focused eye towards the future of guitar amplification.
Specs
- Wattage/Ohms
- 100W reduceable to 20W and 1W
- Effects
- Footswitchable Reverb with freeze effect
- Voices
- 3: USA, UK, Flat
- Channels
- 2: Manual, Preset
- FX Loop
- Yes (series or parallel selectable in Architect)
- Footswitch
- Reverb and Preset
- Master Volume
- Yes
- Controls
- Bass/Middle/Treble, Gain, Master, Voice, Power, Reverb, Response
- Inputs
- MIDI in, Effects Loop ¼”, Line In ¼”
- Outputs
- Speaker ¼” x 2 (8ohm and 16ohm), USB-C, XLR D.I. 2 x 9V DC,
- Weight
- 2.4 lbs